Global Steel Flange Types | SABS 1123 Flange, SANS 1123 Flange, BS10 Flange, BS 4504 Flange

Shandong Hyupshin Flanges Co., Ltd produce forged flanges, carbon steel flanges, standards include ANSI, ASME, DIN, UNI, EN1092-1, JIS, BS 4504, BS T/D, SABS 1123, GOST 12820-80, NS, AS, types include SO, WN, BLIND, THREADED, PLATE, LOOSE

HOME > FLANGES TYPES

PLATE PIPE FLANGE 600/3, 1000/3, 1600/3, 2500/3, 4000/3

Slip-on plate pipe flange actually slip over the pipe. The pipe flanges are typically made with an inside diameter of the pipe flange slightly larger than the outside diameter of the pipe. This allows the flange to slip over the pipe but to still have a somewhat snug fit. Slip-on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip-on pipe flanges. These pipe flanges are also further catagorized as a ring or a hub. Ring pipe flanges and hub pipe flanges are both considered slip on pipe flanges because they both slip over the pipe. Slip on Pipe flanges with a hub have published specifications that range from 1/2" thru 80". Slip on pipe flanges that consist of a flat ring have published specificiations that range from 1/2" thru 80". Hyupshin Flanges provides Slip-On plate pipe flanges in all material grades, specifications and sizes.

SLIP ON PIPE FLANGE 600/5, 1000/5, 1600/5, 2500/5, 4000/5

Slip-on pipe flange actually slip over the pipe. The pipe flanges are typically made with an inside diameter of the pipe flange slightly larger than the outside diameter of the pipe. This allows the flange to slip over the pipe but to still have a somewhat snug fit. Slip-on pipe flanges are secured to the pipe with a fillet weld at the top and the bottom of the slip-on pipe flanges. These pipe flanges are also further catagorized as a ring or a hub. Ring pipe flanges and hub pipe flanges are both considered slip on pipe flanges because they both slip over the pipe. Slip on Pipe flanges with a hub have published specifications that range from 1/2" thru 80". Slip on pipe flanges that consist of a flat ring have published specificiations that range from 1/2" thru 80". Hyupshin Flanges provides Slip-On pipe flanges in all material grades, specifications and sizes.

WELD NECK PIPE FLANGE 600/2, 1000/2, 1600/2, 2500/2, 4000/2

Weld neck pipe flanges attach to the pipe by welding the pipe to the neck of the pipe flange. The allows for the transfer of stress from the weld neck pipe flanges to the pipe itself. This also reduces high stress concentration at the base of the hub of the weld neck pipe flanges. Weld neck pipe flanges are often used for high pressure applications. The inside diameter of a weld neck pipe flange is machined to match the inside diameter of the pipe. Weld Neck Pipe flanges with a hub have published specifications that range from 1/2" thru 80". Hyupshin Flange provides Weld Neck pipe flanges in all material grades, specifications and sizes.

BLIND PIPE FLANGE 600/8, 1000/8, 1600/8, 2500/8, 4000/8

Blind pipe flanges are pipe flanges used to seal the end of a piping system or pressure vessel openings to prevent flow. Blind pipe flanges are commonly used for pressure testing the flow of liquid or gas through a pipe or vessel. Blind pipe flanges also allow easy access to the pipe in the event that work must be done inside the line. Blind pipe flanges are often used for high pressure applications. Slip on Pipe flanges with a hub have published specifications that range from 1/2" thru 80". Hyupshin Flange provides Blind pipe flanges in all material grades, specifications and sizes.

LAP JOINT PIPE FLANGE

Lap Joint Pipe Flanges slide over the pipe and are most commonly used with Stub End Fittings. A pipe is typically welded to the Stub End and the Lap Joint pipe flange is free to rotate around the stub end. The benefit of this is that there will not be any issues with bolt hole alignment. Lap Joint pipe flanges are often used for applications that require frequent dismantling. Slip on Pipe flanges with a hub have published specifications that range from 1/2" thru 24". Sizes above 24" are produced as lap joints to slip on dimensions. Hyupshin Flange provides Lap Joint pipe flanges in all material grades, specifications and sizes.

THREADED PIPE FLANGE 600/4, 1000/4, 1600/4, 2500/4, 4000/4

Threaded pipe flanges are similar to slip-on pipe flanges except the bore of threaded pipe flange has tapered threads. Threaded pipe flanges are used with pipes that have external threads. The benefit of these pipe flanges is that it can be attached without welding. Threaded pipe flanges are often used for small diameter, high pressure requirements. Slip on Pipe flanges with a hub have published specifications that range from 1/2" thru 24". Hyupshin Flange provides Slip-On pipe flanges in all material grades, specifications and sizes.

SOCKET WELD PIPE FLANGE

Socket-weld pipe flanges are typically used on smaller sizes of high pressure pipes. These pipe flanges are attached by inserting the pipe into the socket end and applying fillet weld around the top. This allows for a smooth bore and better flow of the fluid or gas inside of the pipe. `Slip on Pipe flanges with a hub have published specifications that range from 1/2" thru 24". Hyupshin Flange provides Socket Weld pipe flanges in all material grades, specifications and sizes.

■ BACK

Contacts

Links

Certification

Jinan HyupShin Flanges Co., Ltd

Pingpu Rd., Niupai, Mingshui,
Zhangqiu City, Shandong,
China, 250200

Tel: +86 531 832 977 28
Fax: +86 531 832 918 78

Email:sale@hyupshin.cn
http://www.hsflanges.com

● Home Page
● About Us
● Products Center
● Certificates
● Technology
● Services
● Contact Us

● Flanges Gallery
● Company's Blog
● Trade leads
● Flanges Retail
● Русский
● 한국의

Online Service

Sales Manager

Email For Enquiry

Telephone
(86)531-83297728
Fax
(86)531-83291878